Factory DirectFree Freight on Orders $1,500+
Contact Support|
HF
How to Build FenceProfessional DIY & Kits
Standard Galvanized Chain Link Fencing componentsCAD CL-01 / CL-08 / CL-24 • ASTM F1043 Group IC & ASTM F1083 Schedule 40 Swaged & Plain-End Pipe

Top Rail & Structural Tubing

Continuous horizontal support rail tubing in 21ft swaged lengths. Available in residential 1-3/8" OD and heavy commercial 1-5/8" OD Schedule 40 grades.

Verified Component Inventory

2 items cataloged
Pro-Grade Commercial SupplySKU: HTBF-30104
1-3/8" x 21' SE 18ga Galvanized Top Rail Pipe

1-3/8" x 21' SE 18ga Galvanized Top Rail Pipe

1-3/8" OD x 21ft length, swaged end Pro-Grade Galv

$175.77per bundle / 21' pipe
Full Specs →
Pro-Grade Commercial SupplySKU: HTBF-30105
1-5/8" x 21' Swaged Galvanized Top Rail Pipe

1-5/8" x 21' Swaged Galvanized Top Rail Pipe

1.66" OD x 21ft length, swaged end for continuous joining

$32.00per 21' pipe
Full Specs →
Engineering Submittal & Sizing Guide

Swaged 21-Foot Top Rail Continuity & Terminal Brace Assembly

Each 21-foot top rail pipe features a 6-inch factory-tapered (swaged) male end that telescopes directly inside the next pipe, providing 20 ft 6 in of net horizontal coverage per stick without separate sleeves.

Applicable Standards
ASTM F1043 Group IC & ASTM F1083 Schedule 40 Swaged & Plain-End Pipe
Continuous Horizontal Top Rail & Swaged Slip-Joint Construction

Continuous Horizontal Top Rail & Swaged Slip-Joint Construction

Passes through line post loop caps (eye tops) and terminates into a rail end cup at each terminal post.

Top Rail Expansion Sleeve for Field-Cut Plain Ends

Top Rail Expansion Sleeve for Field-Cut Plain Ends

Used whenever the factory swaged end is cut off in the field to join two plain-cut pipe ends.

Top Rail ODStick Length (Net Coverage)Mating Line Post CapMating Terminal Fitting
1-3/8" OD (Res.)21 ft Nominal (20.5 ft Net)1-5/8" × 1-3/8" Loop Cap1-3/8" Rail End Cup + Brace Band
1-5/8" OD (Comm.)21 ft Nominal (20.5 ft Net)1-7/8" × 1-5/8" or 2-3/8" × 1-5/8" Loop Cap1-5/8" Rail End Cup + Beveled Brace Band
1-5/8" Brace Rail6 ft to 10 ft Horizontal TrussTruss Rod Tightener + 3/8" Truss Rod1-5/8" Rail End Cup on 8ft+ Commercial Terminals
Frequently Asked Technical Questions — Top Rail & Tubing

How many 21-foot sticks of swaged top rail do I need for my fence?

Because each 21-foot swaged top rail slides 6 inches inside the adjacent pipe, each stick covers 20.5 linear feet. Divide your total fence run (minus gate openings) by 20.5 and round up to the next whole stick.

Do I need top rail sleeves if my 21ft top rails have swaged ends?

No sleeves are needed for full sticks with factory-swaged ends. Order one 6" top rail sleeve only where you cut a pipe in the field and need to join two un-swaged plain ends together.

Need Exact Quantities?

Use Our Interactive Layout Builder

Don't guess how many posts, rails, caps, or fabric rolls you need. Draw your fence layout on our interactive canvas, configure your heights and finishes, and get a complete, accurate, commercial-grade bill of materials instantly.

Launch 2D Layout Tool