Fittings, Flanges & Concrete Anchors
Tension bars, tension bands, brace bands, rail end cups, loop caps, dome post caps, floor flange base plates, and concrete wedge anchors.
Verified Component Inventory

1-5/8" x 1-3/8" DC Light Eyetop (Loop Cap)
1-5/8" x 1-3/8" die cast loop cap

2-3/8" Regular Brace Band (12ga x 3/4")
2-3/8" brace band for rail attachment

2-3/8" Regular Tension Band (14ga x 3/4")
2-3/8" tension band for terminal post

3/16" x 5/8" x 46" Tension Bar
Galvanized steel tension bar

5/16" x 1-1/4" Carriage Bolt w/ Nut
5/16x1-1/4 galvanized carriage bolt with nut

9-Gauge Class 3 Galvanized Tension Wire
9ga galvanized coil tension wire

6-1/2" 11-Gauge Aluminum Tie Wires
6-1/2" aluminum ties for post/rail attachment
ASTM F567 Terminal Post & Line Post Hardware Takeoff Formulas
Every chain-link fitting is sized by the exact Outside Diameter (OD) of the post or rail it clamps onto. End and gate posts accept 1 fence pull; corner posts accept 2 pulls and require double the bands and tension bars.

Terminal Post Tension Band & Tension Bar Stretching Assembly
Space tension bands evenly at (Fence Height in Feet minus 1) bands per fabric pull.

Line Post Loop Cap (Eye Top) — Post OD × Top Rail OD
Supports the continuous horizontal top rail across the top of each intermediate line post.
| Hardware Component | End / Gate Post (1 Pull) | Corner Post (2 Pulls) | Intermediate Line Post |
|---|---|---|---|
| Tension Bands + 5/16" Bolts | (Height in Ft - 1) pcs (e.g. 5 on 6ft) | 2 × (Height in Ft - 1) pcs (e.g. 10 on 6ft) | None (Use Hook Fence Ties) |
| Tension Bars (Height - 2") | 1 Bar per End / Gate Post | 2 Bars per Corner Post | None |
| Brace Bands + Rail End Cups | 1 Band + 1 Cup (2 Band if Bottom Wire) | 2 Bands + 2 Cups (4 Band if Bottom Wire) | None |
| Post Caps (Dome vs. Loop Cap) | 1 Dome Post Cap per Post | 1 Dome Post Cap per Post | 1 Loop Cap (Eye Top) per Line Post |
How do I know what size tension band, brace band, or post cap to order?
Measure the Outside Diameter (OD) straight across the post top—or wrap a tape measure around the pipe circumference: 4-5/16" wrap = 1-3/8" OD; 5-3/16" wrap = 1-5/8" OD; 5-15/16" wrap = 1-7/8" OD; 7-7/16" wrap = 2-3/8" OD; 9" wrap = 2-7/8" OD.
Are 5/16" × 1-1/4" carriage bolts included with pressed steel tension and brace bands?
Bulk contractor tension bands and brace bands are sold without bolts so you can pair galvanized or black-coated 5/16" × 1-1/4" carriage bolts and hex nuts in exact 100-count bags (1 bolt per tension band and 1 bolt per brace band).
Use Our Interactive Layout Builder
Don't guess how many posts, rails, caps, or fabric rolls you need. Draw your fence layout on our interactive canvas, configure your heights and finishes, and get a complete, accurate, commercial-grade bill of materials instantly.
Launch 2D Layout Tool

