Factory DirectFree Freight on Orders $1,500+
Contact Support|
HF
How to Build FenceProfessional DIY & Kits
Commercial & Industrial Security Chain Link componentsCAD CL-01 / CL-02 / CL-25 • ASTM F626 Pressed Steel, Malleable Iron & Die-Cast Aluminum Fence Fittings

Fittings, Flanges & Concrete Anchors

Tension bars, tension bands, brace bands, rail end cups, loop caps, dome post caps, floor flange base plates, and concrete wedge anchors.

Verified Component Inventory

5 items cataloged
Pro-Grade Commercial SupplySKU: HTBF-018369
4" x 2-3/8" Heavy Duty Nylon Cantilever Roller

4" x 2-3/8" Heavy Duty Nylon Cantilever Roller

Industrial cantilever gate roller assembly

Pro-Grade Commercial SupplySKU: HTBF-018348
Heavy Duty Cantilever Roller Cover

Heavy Duty Cantilever Roller Cover

Safety cover for Heavy Duty roller

Pro-Grade Commercial SupplySKU: HTBF-011608
4" Post Standard Cap

4" Post Standard Cap

4" post cap for commercial posts

Pro-Grade Commercial SupplySKU: HTBF-011605
2-7/8" Post Standard Cap

2-7/8" Post Standard Cap

2-7/8" post cap for terminal posts

Pro-Grade Commercial SupplySKU: HTBF-017373
2-7/8" Cantilever Gate Latch

2-7/8" Cantilever Gate Latch

Heavy industrial cantilever gate latch

Engineering Submittal & Sizing Guide

ASTM F567 Terminal Post & Line Post Hardware Takeoff Formulas

Every chain-link fitting is sized by the exact Outside Diameter (OD) of the post or rail it clamps onto. End and gate posts accept 1 fence pull; corner posts accept 2 pulls and require double the bands and tension bars.

Applicable Standards
ASTM F626 Pressed Steel, Malleable Iron & Die-Cast Aluminum Fence Fittings
Terminal Post Tension Band & Tension Bar Stretching Assembly

Terminal Post Tension Band & Tension Bar Stretching Assembly

Space tension bands evenly at (Fence Height in Feet minus 1) bands per fabric pull.

Line Post Loop Cap (Eye Top) — Post OD × Top Rail OD

Line Post Loop Cap (Eye Top) — Post OD × Top Rail OD

Supports the continuous horizontal top rail across the top of each intermediate line post.

Hardware ComponentEnd / Gate Post (1 Pull)Corner Post (2 Pulls)Intermediate Line Post
Tension Bands + 5/16" Bolts(Height in Ft - 1) pcs (e.g. 5 on 6ft)2 × (Height in Ft - 1) pcs (e.g. 10 on 6ft)None (Use Hook Fence Ties)
Tension Bars (Height - 2")1 Bar per End / Gate Post2 Bars per Corner PostNone
Brace Bands + Rail End Cups1 Band + 1 Cup (2 Band if Bottom Wire)2 Bands + 2 Cups (4 Band if Bottom Wire)None
Post Caps (Dome vs. Loop Cap)1 Dome Post Cap per Post1 Dome Post Cap per Post1 Loop Cap (Eye Top) per Line Post
Frequently Asked Technical Questions — Fittings & Hardware

How do I know what size tension band, brace band, or post cap to order?

Measure the Outside Diameter (OD) straight across the post top—or wrap a tape measure around the pipe circumference: 4-5/16" wrap = 1-3/8" OD; 5-3/16" wrap = 1-5/8" OD; 5-15/16" wrap = 1-7/8" OD; 7-7/16" wrap = 2-3/8" OD; 9" wrap = 2-7/8" OD.

Are 5/16" × 1-1/4" carriage bolts included with pressed steel tension and brace bands?

Bulk contractor tension bands and brace bands are sold without bolts so you can pair galvanized or black-coated 5/16" × 1-1/4" carriage bolts and hex nuts in exact 100-count bags (1 bolt per tension band and 1 bolt per brace band).

Need Exact Quantities?

Use Our Interactive Layout Builder

Don't guess how many posts, rails, caps, or fabric rolls you need. Draw your fence layout on our interactive canvas, configure your heights and finishes, and get a complete, accurate, commercial-grade bill of materials instantly.

Launch 2D Layout Tool