Factory DirectFree Freight on Orders $1,500+
Contact Support|
HF
How to Build FenceProfessional DIY & Kits

Loading product...

Common questions about the Ball Top Loop Cap

How do I measure my fence post and top rail for a loop cap?
Loop caps are sized by Outside Diameter (OD), never inside pipe diameter. Measure across the outer edges of your vertical line post (most residential line posts are 1-5/8" OD or 1-7/8" OD; commercial line posts are 2" or 2-3/8" OD) and your horizontal top rail (standard residential top rail is 1-3/8" OD; commercial top rail is 1-5/8" OD).
How many loop caps do I need for my chain-link fence run?
You need exactly 1 loop cap (eye top) for every intermediate line post (spaced at maximum 10 ft on-center per CAD Spec CL-01). Terminal posts (end, corner, and gate posts) use dome post caps instead of loop caps.
What is the difference between pressed steel and die-cast aluminum loop caps?
Pressed steel loop caps are cold-formed from heavy-gauge steel strip and hot-dip galvanized per ASTM F626 / A153 for higher impact resistance against heavy top-rail loads. Die-cast aluminum loop caps offer lightweight, rust-free corrosion resistance for standard residential 1-3/8" top rails.