Chain Link Privacy Slats & Enclosures
High-density polyethylene (HDPE) privacy slats designed to slide vertically into standard 2" diamond chain link mesh for sight and wind screening.
3D Chain Link Structure Preview
Interactive hardware, security & privacy visualizer • Spec CL-15 / DWG #1-1006
Interactive Hardware Toggles
Calculated Hardware Units (200 LF)
Line & Terminal Posts:24 Posts
Flange Plates + Pro-Grade Anchors:24 Flanges / 96 Anchors
Boulevard T-Clamps:20 Clamps (Pro-Grade Case)
Hog Rings & Tension Wire:600 Rings (2 Pro-Grade Case)
Configure Chain Link Privacy Slats & Enclosures Run
Chain Link Fabric & Mesh Rolls
50ft rolls in 9ga, 11ga, and 11.5ga diamond mesh

6ft Height Winged Privacy Slats (10 LF Bag)
Covers 10 linear feet of 6ft chain link fence (90% privacy)

8ft Height Heavy Duty Security Privacy Slats (10 LF Bag)
Covers 10 linear feet of 8ft chain link fence
Fittings, Flanges & Concrete Anchors
Tension bars, floor flange base plates, loop caps, bands, and wedge anchors

Sliding Bottom Locking Channel Tracks (10ft)
Locks privacy slats in place at bottom of fence
Chain-Link Technical Reference, Diagrams & Part Directory
Authentic engineering schematics, ASTM pipe Outside Diameter (OD) standards, and direct component lookups.

Knuckle (KK) vs. Barbed Twist (KT/TT) Edge
Diamond size is measured parallel between opposing wire sides (standard 2" mesh).

6 Ga, 9 Ga, 11 Ga & 11.5 Ga Core Diameter
Lower gauge number = thicker structural steel wire and higher break load capacity.

ASTM F668 Polymer Over Galvanized Core
UV-stabilized PVC/polyolefin fused over zinc-coated steel core wire for coastal durability.
Knuckle-Knuckle (KK) Safe Edge
Both top and bottom fabric wire ends are knuckled (folded back in a smooth closed loop). Eliminates sharp wire points to protect children, pets, and athletic fields.
Knuckle-Twist (KT) Commercial Mesh
9-gauge structural wire (0.148" diameter, 1,290 lbf break strength) for commercial perimeters, industrial yards, and 6ft–8ft security barriers.
Need an Exact Chain-Link BOM?
Draw your fence runs to calculate every roll, post, top rail, tension band, brace band, and loop cap automatically.