Factory DirectFree Freight on Orders $1,500+
Contact Support|
HF
How to Build FenceProfessional DIY & Kits
Special-Order Color

Green Vinyl Coated Chain Link Fencing

Galvanized steel wire core encapsulated in an extruded forest-green PVC coating. The finish disappears into hedges, tree lines, ball fields and park perimeters while the polymer layer shrugs off coastal salt and weather.

3D Chain Link Structure Preview

Interactive hardware, security & privacy visualizer • Spec CL-15 / DWG #1-1006

8' Height (96")Green Vinyl PVCFlanged Base (Concrete Floor)
Concrete Shop Floor (Flange Mounted)8'-0" [2438mm] HEIGHT ABOVE GRADE10'-0" [3048mm] MAX POST SPACING1-5/8" Rail End CupTension Bar & Bands5/16" Truss Rod w/ Turnbuckle1-7/8" x 1-5/8" Loop CapBoulevard T-Clamp (Pro-Grade Case)Bottom Coil Tension Wire + Hog Rings6" Swaged Sleeve CouplerBrace Band & Carriage Bolt7ga Coil Tension Wire + 9ga Hog RingsPro-Grade 3/8" x 3" Concrete Wedge AnchorsPRO-GRADE ARCHITECTURAL CADDWG #1-1006 FLANGE DETAILFooting: 4x Post OD (Min 36" Depth)ASTM-A153 Galvanized / RR-F-191GSCALE: 3/8" = 1'-0" | 10'-0" MAX SPACING

Interactive Hardware Toggles

Fence Height:
Finish Coating:
Shop Floor Flange Mount:
Mid-Rail + Boulevard Clamps:
Bottom Tension Wire + Hog Rings:
Barbed Wire Security (CL-24):
HDPE Privacy Slats (90% Sight):
Calculated Hardware Units (200 LF)

Line & Terminal Posts:24 Posts

Flange Plates + Pro-Grade Anchors:24 Flanges / 96 Anchors

Boulevard T-Clamps:20 Clamps (Pro-Grade Case)

Hog Rings & Tension Wire:600 Rings (2 Pro-Grade Case)

Pro-Grade Certified Components
Extruded Green PVC over Galvanized Steel Core
Matching Green Line Posts, Top Rail & Fittings
ASTM F668 Polymer-Coated Fabric Standard
Resists Chipping, Peeling & Rust
Instant Material Estimator

Configure Green Vinyl Coated Chain Link Fencing Run

Est. Material Total$1,605
20 ft250 ft500 ft
Walk Gates (4' Single)Includes hinges, latch & terminal posts
1
Drive Gates (Double)Includes drop rod & heavy terminal posts
0
Ready to build layout?Open the 2D Layout Calculator for exact section lengths & BOM itemization.
Push to 2D Layout Builder

Priced per job

Green Vinyl Coated Chain Link Fencing fabric, posts, top rail and fittings are ordered in matching color for each project rather than stocked by the roll. Configure your run in the calculator or request a quote and we will price every component for your footage and height.

PRO-GRADE ENGINEERING & BLUEPRINT GUIDE

Chain-Link Technical Reference, Diagrams & Part Directory

Authentic engineering schematics, ASTM pipe Outside Diameter (OD) standards, and direct component lookups.

Chain-Link Fabric Diamond Mesh & Knuckle vs Twist Selvage Diagram
Blueprint Fig. 1 — Mesh & Selvage

Knuckle (KK) vs. Barbed Twist (KT/TT) Edge

Diamond size is measured parallel between opposing wire sides (standard 2" mesh).

Chain-Link Wire Gauge Comparison 6ga 9ga 11ga 11.5ga
Blueprint Fig. 2 — Wire Gauge Scale

6 Ga, 9 Ga, 11 Ga & 11.5 Ga Core Diameter

Lower gauge number = thicker structural steel wire and higher break load capacity.

Polymer Vinyl-Coated Galvanized Core Wire Cutaway
Blueprint Fig. 3 — Dual-Layer Coating

ASTM F668 Polymer Over Galvanized Core

UV-stabilized PVC/polyolefin fused over zinc-coated steel core wire for coastal durability.

SELVAGE SPEC: KK
Residential & Public Yards

Knuckle-Knuckle (KK) Safe Edge

Both top and bottom fabric wire ends are knuckled (folded back in a smooth closed loop). Eliminates sharp wire points to protect children, pets, and athletic fields.

SELVAGE SPEC: KT / TT
Commercial & Security

Knuckle-Twist (KT) Commercial Mesh

9-gauge structural wire (0.148" diameter, 1,290 lbf break strength) for commercial perimeters, industrial yards, and 6ft–8ft security barriers.

Need an Exact Chain-Link BOM?

Draw your fence runs to calculate every roll, post, top rail, tension band, brace band, and loop cap automatically.